Radio switch greenhouse shutters 30A 220VAC motor forward reverse direction up and down with stop 500-1000m range Industrial quality

 Produkte Video:  AC220V Motor vorwärts Rückwärts Richtung ansteuerung seilwinde mit manueller Taste

Product description
Application: Shutters, roller shutters, projection screens, awnings, roller blinds for greenhouses, telecontrol electric doors and windows, signal control, tower cranes, pumps, winches, conveyors or other equipment with AC220V motors
All remote control switch module products adopt digital wireless coding technology, no sense and the switches do not interfere with each other.
The board adopts high quality double sided PCB, power part adopts high quality pure copper coil transformer. The power of power part is much higher than the commonly used low-cost resistance-capacity voltage-reducing circuit on the market, and it increases the life of the complete remote switch
The receiver can withstand 30A current (peak), can directly control forward and reverse direction of AC220V motor. To extend the life of the receiver board, we do not recommend to control large power loads, Recommended control power below 3000W

Characteristic
With manual function: Can be controlled manually, if the battery of the remote control is empty or you have lost the remote control, you can use the manual function.
High Performance: The 30A relay is used to directly control the positive and negative rotation of the 3000 W motor
With limit function: You can connect limit switch, effectively prevent the burned engine.
The radio signal passes through walls, floors and doors. Wireless control, easy to install.
With the learn button you can simply delete or learn the code.
You could turn on / off the receiver with transmitter (remote control) from any location within a reliable distance. The wireless radio signals can pass through walls, floors and doors
One or more transmitters can simultaneously control one or more receivers.
If you use two or more receivers in the same place, you can set them with different codes.

parameter
Operating voltage: AC190V ~ 250V
Working frequency: 315MHZ
Contact capacity: ≤30 A / 250 VAC;
Receiver sensitivity:> -114 dB
Range: 500M-1000M
Coding type: Learning type
Receiver size: 110 * 92 * 43mm
Control modes: Currently, Latch (adjustable)
Learning code: Add transmitter via the learn button on the receiver
Antenna: Telescopic antenna (The total length of the antenna: 29cm, stroke length of antenna: 20cm)

Control mode Description
Latch (1 button on / another button off)
Momentary (Press and hold -> On; Release -> Off

Control mode setting
Latch: toggle switch to ON position
Momentary: toggle switch to another position

Learning method and steps
Press the learn button once that the indicator light is lit, and then press the button on the remote control, then the indicator light is off, it means that the teach-in is successful.

Delete the code
Press and hold the learn button for 8 seconds, the LED indicator turns from ON to OFF, it means that all stored codes have been successfully erased.

Wiring method for winch
Single capacitor motors within 3000w: Open the motor cover, three cables come out of the motor, the middle cable is the common terminal and the two sides are forward and backward. three cables connect the common forward and reverse terminals from our radio remote control. Handle has two wires of the capacitor, one cable connects forward, one cable connects backward.

And when you control your motor / winch, you need to confirm the following parameter.
how much is the power of motor? How many capacitors does the motor / winch have? How many wires does the motor come out? If you have any problem about it, please tell us via email.
Email: sale@einausschalt.com