All Categories
Payments by PayPal

Other Products in 4 channels receiver transmitter ( 30 )



RF remote control switch --- one transmitter + 4 receiver radio switch light motor industrial model construction radio remote control high range 1000M 1500M

RF remote control switch --- one transmitter + 4 receiver radio switch light motor industrial model construction radio remote control high range 1000M 1500M

Starting at: €46.06

  • Model: 0060269
  • Shipping Weight: 250g
  • Units in Stock: 9999

Please Choose:



Power supply





frequency



Add to Cart:


PayPal Acceptance Mark


  • Description
  • You make also like
  • Payment & Delivery
  • Contacts

Manual: http://einausschalten.com/0060269-y.pdf

 

10A 4 channels DC12V radio remote control radio switch controller - 4 receiver & 1 transmitter light motor pump garage door industrial remote control independent input / output independent control

 

delivery

4 x receiver

1 x transmitter with battery

 

characteristic

The receiver has been developed for the one-transmitter multiple receiver system. Use the 4 buttons transmitter to control 4 receivers at the same time. You can work separately.

Learning code: if you lose the transmitter, you do not have to change the whole set, you only need to buy a station from the same code, simply.

Small, circuit board size of only 35 * 32 * 19mm.

Wireless control, easy to install.

With learn button you can simply delete the code or learn.

Application: light, television, motors, fans, cameras, video signals, audio signals, electric doors / locks / windows / blinds / cars or other devices.

You could turn the receiver on / off with a transmitter (remote control) from any location within a reliable distance. The wireless radio signals can run through walls, floors and doors

Reliable control: The transmitter (encoding) and the receiver (decoding) use an 8-bit code.

One or more transmitters can simultaneously control one or more receivers.

If you use two or more receivers in the same place, you can set them with different codes.

Each receiving plate can load 10A operating current, can directly operate DC / AC load, each relay normally has closed (normally open) contacts. In order to prolong the service life, we recommend that the high-performance of the device is 500W / 220V for each receiver and the high-power of the device is 50W / 12V for each receiver.

 

parameter

Item Type: Switch

Range: 0-1500M

Control mode: Toggle + Latch + Momentary / adjustable

Working range of relay: AC110 ~ 240V or DC0 ~ 28V (relay output can control DC and AC devices)

Switch Type: Remote control

Channel: 4 channels

Working temperature: -10'C- + 70'C

Operating voltage: 12V

Maximum operating current: 10A

Working frequency: 315MHz / 433MHz

Sensitivity: ≥-105Bm

Antenna: with internal antenna

 

Control mode Description

Toggle (1 button on / same button off)

Latch (1 key on / another key off)

Momentary (pushbutton function, relay moves as long as button is pressed)

Note

Welding T: Toggle

Welding M: Momentary

Non-welding T and M: Latch

 

To learn

1: Turn on the power until the light illuminates for 3 seconds when light is off, press the learn button again.

2: Now lights up, press the transmitter button, then the LED indicator is switched off. It means that learning is successful.

 

Delete the code

Turn on the power until the light illuminates for 3 seconds when light is off, then press and hold down the learn button until the light is ON. Approx. 8 seconds the light is switched off.

It means that all stored codes have been deleted successfully.

 

Learning method via ALL-ON

1: Turn on the power and indicator is on, then immediately press the learn button twice, and the light is turned off and on twice. Until the LED indicator is ON, press the transmitter button, then the LED indicator is off. It means that learning for ALL-ON is successful.

Learn method over ALL-OFF

1: Turn on the power and indicator is on, then immediately press the learn button, and the light will turn off and on. Until the LED indicator is ON, press the transmitter button, then the LED indicator is off. It means that learning for ALL-OFF is successful.

 

reach

Max. Range in the free range: 0-1500m (Maximum range of the sensor / signal under optimal conditions, or in the open field / with clear visual connection.)

Note

The hand transmitters have a range in the free field of about 1500m. Constructions, interfering radiation and interference fields reduce the range.

The control should not be installed in the direct vicinity of metallic surfaces. Strong local transmitters (e.g., radio headphones whose transmit frequency is identical to the controller may interfere with reception.)

Order: 

We try our best to describe the products in details as possible as we could. If you still have the question, pls don't hesitate to contact us.

Payment: 
1. Paypal: (www.paypal.com)
You can directly pay this payment to our paypal account:
 sale@einausschalten.com . Or you also can tell us your PayPal account, we will send a bill to you via PayPal.

2.You can also pay the payment by MasterCard and VISA.

(1) Choose to pay with your credit card in PayPal.

(2) We will send you an email for the payment request, and you can pay for your order through that email by a MasterCard or VISA.

Delivery:
We will deliver directly the parcel to your delivery address as soon as we receive your full payment. 
For high valued products, we may require the verification of your mailing address before the delivery. 
All items are carefully checked and well packed before the dispatch. 
Delivery methods:
1. Airmail: 7~15 working days (If your products has the battery, it will take 10-25 working days.)
2. Door to door Express: 3~9 working days, For example: EMS, DHL, UPS, Fedex, etc.

Returns:
Defective and missing parts: If you receive an item that is defective, or not the item you ordered, or was damaged in shipping, pls send back to us within 7 days from the date of receipt. 
The item must be returned to us in its original and unused condition with its original box, packaging material, contents, and accessories. 
In case of the missing parts, please notify us on the same day once you receive the product.

Customs duties or import taxes:
You might have to pay an amount charged by your Customs including ( and not limited to) the duties, taxes or any other extra fees collected by courier company or postal services.

(1) If you choose to transport by package, you don’t need to pay any customs fees.
(2) If you choose express transportation, such as DHL, UPS, etc. When you receive the package, you typically don’t have to pay tariffs. But if you pay the tariff, please contact us and send us the tariff bill, we will return you the same amount of cash voucher, you can use this voucher to purchase any products of us.

B2B:
Though we are online retailer, we're also looking to develop relationships with B2B clients and will provide customerized products based on your requirements.

Customer oriented Service:
To satisfy customer's requirements is our priority. We sincerely hope that you will enjoy a cheerful online shopping experience with us.
If you have questions about our products or the website, pls don't hesitate to contact us.

Contact Us:

Please contact us with any comments, questions or suggestions that you may have, we will be happy to assist you.

Bulk Orders
 
Besides retail orders, we also accept bulk orders. If you have any queries or questions, please do not hesitate to contact us with following Contact Us Form. We will give you a favourable discount price according to your order quantity.



Company:

Lejing Industry Development Co., Ltd.

 

Adresse:
You Yuan Xin Cun
Meilong Straße, Longhua
Shenzhen, Guangdong
China518,000

E-Mailsale@einausschalten.com

Whatsapp: +86 183 2644 0199

Phone number: +86 183 2644 0199

Youtube ID: Einausschalten


Newsletter: